xilanh điện EZS Series


0 VNĐ

High rigidity and high accuracy

By adopting a highly rigid guide, we realized a high allowable moment while being compact.

High rigidity, high precision guide

Running parallelism 0.03 mm or less

THK's LM Guide * is adopted as a guide . 
You can receive a high moment with a thin stainless steel guide. 
Running with guides with excellent accuracy, we were able to keep the parallelism below 0.03 mm.

* It is a registered trademark of THK Corporation.

Achieving high payload quantity while being thin

Achieving high payload quantity while being thin

High allowable moment

It is small but realizes high moment.

High allowable moment

 

● Allowable moment value in rolling direction [N · m]

Model number
Static 
permissible moment * 1
Dynamic 
allowable moment * 2
EZS 3
52.0
10.5
EZS 4
176
27.8
EZS 6
340
55.6

※ 1 Load moment allowable by linear guide during stop 
* 2 Load moment allowable by linear guide during operation

Space saving

Since there is no interference with the workpiece, you can use the space as much as possible. Adhesive placement is also possible.

Space saving

Cable outlet can be changed

Since the mounting direction of the motor can be changed to 4 directions * , you can freely change the cable outlet according to the installation location.

※ The turn back type is 3 directions.

Cable outlet can be changed

Fold type

The folded type has a total length of 136.4 mm shorter than the straight type, which contributes to space saving of the device.

Fold type

Simple dustproof structure

A simple dust-proof structure that adopts a stainless steel sheet prevents foreign matter from entering and suppresses dust generation.

Suppression of dust generation

By adopting a low-dust roller structure in the table part, abrasion powder will not be generated due to friction with the stainless sheet.

Prevention of invasion of foreign matter

Simple dustproof structure by using stainless sheet prevents foreign matter from entering from outside.

Low dust roller structure (patented)

By installing a low dusting roller structure on the table part, it makes rolling contact with the stainless steel sheet to prevent generation of abrasion powder. 
In addition to reducing dust generation, it also leads to improved durability of the stainless steel sheet.

Low dust roller structure

Clean room support (ISO standard cleanliness class 3)

In addition to the low dusting roller structure, we also prepared clean room compliance with the ISO standard class 3 (equivalent to FED standard class 1) cleanliness through adoption of low dust clean grease.

For details on clean room compatibility, please click here.

Variation · Specification

Since it can be shipped in as short as 5 days, it contributes to shortening the delivery time of customer's equipment.

AR series mounted

Built-in positioning function type
type
Slider width × height 
[mm]
Model number
Maximum payload 
[kg]
Stroke 
[mm]
Power supply input 
[V]
Straight type 

folded type
54 × 50
Horizontal 15 / Vertical 7
50 to 700 (50 mm increments)
Single-phase 100-120 
single-phase 200-240 
DC24 / 48
74 × 50
Horizontal 30 / Vertical 14
50 to 700 (50 mm increments)
74 × 66.5
Horizontal 60 / Vertical 30
50 to 850 (50 mm increments)
Pulse train input type
type
Slider width × height 
[mm]
Model number
Maximum payload 
[kg]
Stroke 
[mm]
Power supply input 
[V]
Straight type 

folded type
54 × 50
Horizontal 15 / Vertical 7
50 to 700 (50 mm increments)
Single phase 100 - 115  
Single phase 200 - 230
Three phase 200 - 230
DC 24/48
74 × 50
Horizontal 30 / Vertical 14
50 to 700 (50 mm increments)
74 × 66.5
Horizontal 60 / Vertical 30
50 to 850 (50 mm increments)

Equipped with AZ series

Built-in positioning function type
type
Slider width × height 
[mm]
Model number
Maximum payload 
[kg]
Stroke 
[mm]
Power supply input 
[V]
Straight type 

folded type
54 × 50
Horizontal 15 / Vertical 7
50 to 700 (50 mm increments)
Single-phase 100-120 
single-phase / three-phase 200-240 
DC24 / 48
74 × 50
Horizontal 30 / Vertical 14
50 to 700 (50 mm increments)
74 × 66.5
Horizontal 60 / Vertical 30
50 to 850 (50 mm increments)
Pulse train input type
type
Slider width × height 
[mm]
Model number
Maximum payload 
[kg]
Stroke 
[mm]
Power supply input 
[V]
Straight type 

folded type
54 × 50
Horizontal 15 / Vertical 7
50 to 700 (50 mm increments)
Single-phase 100-120 
single-phase / three-phase 200-240 
DC24 / 48
74 × 50
Horizontal 30 / Vertical 14
50 to 700 (50 mm increments)
74 × 66.5
Horizontal 60 / Vertical 30
50 to 850 (50 mm increments)
Bình luận