motor Brushless BMU series

Kurukuri Pon. Easy speed control.

• 

  Turn the dial to set the desired rotation speed.

• 

  If you rotate it slowly, it changes by 1 r / min at a time.

• 

  Push the dial to press the dial to set the rotation speed.

• 

  You can also lock the dial operation.

Easy speed control seen with video

Easy wiring. Start right away.

• 

  Motor and driver can be connected easily.

• 

  The power supply and I / O connector are screwless type.

• 

  You can start right away with one switch.

• 

  Switching of motor rotation direction is one touch.

Easy wiring and starting up for watching

Motor and gearhead assembled

We will deliver the motor and gearhead assembled in advance. It reduces the labor required for the customer to install, and it can be attached to the device immediately. You can remove the gear head and change the mounting position to 90 ° increments. It is possible to change the position of the connector according to the customer's equipment.

Brushless motor designed for small size, high output, high efficiency

Maximum rotation speed 4000 r / min Speed ​​ratio 1: 50 ^* (2.5 times compared to the past)

BMU series, maximum speed 4000 r / min ^* . Speed ​​ratio 1: 50 (80 ~ 4000 r / min ^* ) realized. The rate of fluctuation of speed has also improved significantly from ± 0.5% of conventional products to ± 0.2%. We respond to customer's needs with the highest standard speed control.

※

It depends on some gear head.

High strength · High reduction gear head which can be selected according to application

In addition to the conventional parallel shaft gear head GFV gear, lineup of JV gear of high reduction ratio, JB gear of high strength with leg attachment, JH gear of orthogonal axis hollow hypoid is up. Allowable load of the output shaft and maximum permissible torque have greatly improved. Moreover, it can correspond to various mounting methods.